Sharp MD-X60H - Manual (Page 38)

(Continued)
■ To change disc names and track names
ENTER
MD
NAME/
TOC EDIT
TIMER/
DELETE
4
5
4
5
To change disc names:
1
During playback, press the MD ■ button.
2
Press the NAME/TOC EDIT button, and then select "DISC NAME" using the
jog dial.
To change track names:
1
Whilst in the stop mode, select the track name you want to change, using the
jog dial.
2
Press the NAME/TOC EDIT button.
3
Within 10 seconds, press the ENTER button.
● The unit will enter the character input mode.
● To cancel the operation, press the MD ■ button.
4
Press the 3 / 2 button to make the character you want to erase begin
flashing.
5
Press the TIMER/DELETE button.
6
Press the NAME/TOC EDIT button.
To add a character:
After performing steps 1 to 3 above, do the following:
Example: To change "BET" to "BEST"
4
Press the 3 / 2 button to make the character at the place you want to add
a letter begin flashing.
5
Select the character you want to add, using the jog dial. Then, press the ENTER
button.
6
Press the NAME/TOC EDIT button.
Jog dial
MD-X60H(SUK) TINSE0227AWZZ
37