Sharp MD-X60H - Manual (Page 22)

CONVENIENT CD AND MD OPERATIONS
■ Direct-selection play
By using the DIRECT KEY on the remote control, you can play any track directly.
CD
1 -3
CD
MD
CD
1 -3
CD
MD DIRECT
KEY
CD
MD
CD
MD
CD
MD
When CD is selected:
1
Press one of the CD 1 0 - 3 0 buttons to select the CD you want to listen
to.
2
Press the CD ■ button.
3
Use the DIRECT KEY to select the desired track number.
When MD is selected:
1
Press the MD ■ button.
2
Use the DIRECT KEY to select the desired track number.
A. To select track numbers 11 to 99
Press the Y 10 button first, then press the track number.
For example, to select 36:
①
Press the Y 10 button.
②
Within 5 seconds, press the "3" button.
③
Within 5 seconds, press the "6" button.
B. To select a track number 100 or higher (only for MDs)
Press the Y 10 button twice, then press the track number.
For example, to select 128:
①
Press the Y 10 button.
②
Within 5 seconds, press the Y 10 button.
③
Within 5 seconds, press the "1" button.
④
Within 5 seconds, press the "2" button.
⑤
Within 5 seconds, press the "8" button.
The beginning of the selected track will be found, and play will begin automatically.
Notes:
● A track number higher than the number of tracks on the disc cannot be selected.
● During APMS play or random play, track number selection play is not possible.
■ APSS (Auto Program Search System)
APSS automatically locates the beginning of any track.
To move to the beginning of the next track:
During playback ... Turn the jog dial clockwise.
Or press the
4 button on the remote control.
To restart the track being played:
During playback ... Turn the jog dial anti-clockwise.
Or press the
5 button on the remote control.
When using the jog dial whilst in the stop mode:
Every time the jog dial is turned (or each time the 5 or 4 button on the remote
control is pressed), the track number will go up or down by one. If you press the
0 6 button, playback will begin from the track being displayed.
Jog dial
MD-X60H(SUK) TINSE0227AWZZ
21