SBC comm SBC-6020 User Manual
Page 40
press the
OK key (Soft Key 1
), the call blocking function is
disabled.
3. Insert the new blocked number or go to the next blocking
location and enter a new blocked number.
4. Press the
OK key (Soft Key 1
) to confirm. The display will
show
“Handset n”, where n is the stored handset number.
5. Choose the handset that will be blocked from calling that prefix.
6. Press the
OK key (Soft Key 1
) to confirm.
The call blocking function will be enabled and it would not be
possible to make a call to the stored, blocked number.
Factory Reset
The Reset operation allows the user to reset all the customized
settings including the phone book and the received caller ID list. To
execute the reset with the handset in standby mode:
1. Go into the
“HS Settings” menu. Press the
OK key (Soft Key 1
).
2. Choose
“Factory Reset”. Press the
OK key (Soft Key 1
).
“Are
you sure ?” is displayed on the LCD.
3. Press the
OK key (Soft Key 1
) to confirm.
Te
le
ph
on
e O
pe
ra
tio
n