SBC comm SBC-6020 - Manual (Page 27)

Te
le
ph
on
e
O
pe
ra
ti
on
Room monitoring
You can monitor another room as long as two handsets are registered
to the same base. For example, you could monitor a child by placing one
handset in your room and another handset in the child’s room.
To enable this function:
1. Go to the
“HS Settings” menu. Press the OK key (Soft Key 1 )
key.
2. Choose “Room Monitor”. Press the OK key (Soft Key 1 ).
3. Choose “On” to enable the function and choose “Off” to disable
the function. Press the OK key (Soft Key 1 ).
To use this function, enable the function on one handset and place it
in another room. Try placing an internal call to that handset. To stop
the room monitoring, press the key.