SBC comm SBC-6020 User Manual
Page 13
Volume setting for base
You also can set the volume for the melody.
1. Go to
“Base Settings” menu. Press the
OK key (Soft Key 1
).
2. Choose
“Base Ring Tone”. Press the
OK key (Soft Key 1
).
3. Choose
“Volume”. Press the
OK key (Soft Key 1
). The display
will show the previously stored volume level.
4. Choose from volumes 1 through 9. Press the
OK key (Soft Key 1
)
to confirm.
Melody setting for base
You can choose from 9 different ring melodies.
1. Go to the
“Base Settings” menu. Press the
OK key (Soft Key 1
).
2. Choose
“Base Ring Tone”. Press the
OK key (Soft Key 1
).
3. Choose
“Melody”. Press the
OK key (Soft Key 1
).
4. Choose from melodies 1 through 9. Press the
OK key (Soft Key 1
) to confirm.
G
et
ti
n
g
S
ta
rt
ed