SBC comm SBC-6020 User Manual

Page 17

Flash
While on a call, you may want to transfer the call to someone else

connected to the same PABX. This can be done by using the flash

function.
• Press the

Flash key (Soft Key 2

) or press and hold the

# key for

2 seconds during an external call.

The base station will then transmit a FLASH signal to the line.
Inter-digit pause
Some phone numbers require you to dial additional digits a few

seconds after entering the phone number. You can insert a 3-second

pause while in pre-dialing mode.
1. Enter the first set of numbers.
2. Press the key and a “-” will be inserted. Alternatively, you can press

the

Options key (Soft Key 1

) and choose the item

“Insert Pause”.

3. Enter the number you want to dial, and press the key to start a call.