SBC comm SBC-6020 User Manual

Page 18

Register to Base
In multi-handset mode, you may need to switch the base to which a

handset is assigned. Up to four assignments are possible. You can set

based selection manually or automatically.

Register an optional handset
1. Press and hold down the button on the base for 5 seconds or

until the base begin to give out a confirmation tone.

2. Go into the

“HS setting” menu of the handset and press the

or keys until the

“Register to BS” is selected. Press the

OK key

(Soft Key 1

) and select the base number (from 1 to 4) where

the handset should be registered by using the or keys.

3. Press the

OK key (Soft Key 1

). The handset now searches for

the base. When it finds the signal, the Base Identification Code

is displayed.

4. Press the

OK key (Soft Key 1

) and insert the PIN code (default

1590). Press the

OK key (Soft Key 1

) to confirm.

Register a handset on a secondary base

The procedure is the same as previously shown in “Register an

optional handset”. At the end of this procedure, the base will

assign the number to the handset automatically.

If the base where you want to register a handset is a different model,

When registering an
optional handset or
registering a handset
on a secondary base,
you must know the
PIN code of the base
where the handset
will be registered.

NOTE!

tin