Sony BRC-300P - Manual (Page 37)

O
p
e
rat
ion Using t
he RM-B
R30
0
Remot
e
Cont
rol Unit
Pan/Tilt and Zoom Operation
37
If the camera moves in a different
direction from that you intended
The camera is preset to face toward the right whenever
the joystick is inclined to the right. You might wish to
face the camera toward the opposite direction from that
in which you inclined the joystick, for example, when
you change the direction of the camera while checking
the picture on the screen. In such a case, press the
POSITION 2 (REV) button while holding down the L/R
DIRECTION button.
To reset the setting, press the POSITION 1 (STD) button
while holding down the L/R DIRECTION button.
Note
The setting above only changes the signal emitted from
the RM-BR300 Remote Control Unit, and does not
change the setting of the camera itself.
If the STANDBY lamp of the camera
flashes
When the camera is moved or turned by hand or by
external shock, the microcomputer inside the camera
may not be able to memorize the pan/tilt position
properly.
To reset the pan/tilt position, press the PAN-TILT
RESET button.
Zooming
Turn the dial on the upper part of the joystick.
Note
When you perform pan/tilt operation while the camera is
in the telephoto mode, the moving speed of the image on
the screen may be a little jerky.
Joystick Movement of the
camera Setting
1
9
STD
L/R
DIRECTION
Incline to the right.
While holding down
Press.
2
10
REV
L/R
DIRECTION
Incline to the right.
While holding down
Press.
STANDBY flashes.
Subject appears farther
away. (Wide angle)
Subject appears closer.
(Telephoto)