Sony BRC-300P - Manual (Page 28)

Ad
jus
ting an
d
S
e
tti
ng Wit
h
Men
u
s
PAN TILT ZOOM Menu
28
PAN TILT ZOOM Menu
The PAN TILT ZOOM menu is used to select the pan/
tilt/zoom mode.
PAN-TILT LIMIT
When you set PAN to ON, LEFT and RIGHT appear and
you can select the limit of pan operation. When you set
TILT to ON, UP and DOWN appear and you can select
the limit of tilt operation.
You can select the following values:
PAN LEFT: LEFT END, +35359 to -35241 STEP,
selectable with an interval of 200 STEP
PAN RIGHT: RIGHT END, -35241 to +35359 STEP,
selectable with an interval of 200 STEP
TILT DOWN: DOWN END, -06170 to +18630 STEP,
selectable with an interval of 200 STEP
TILT UP: UP END, +18630 to -06170 STEP,
selectable with an interval of 200 STEP
1 STEP represents 0.0048°.
Setting range of PAN LEFT/PAN RIGHT
Setting range of TILT DOWN/TILT UP
Note
The PAN-TILT LIMIT setting is reset to the factory
setting when you change IM-FLIP of the SYSTEM
menu.
D-ZOOM (digital zoom)
When it is set to ON, LIMIT appears and the electronic
zoom (
×4 or ×2) operates after the optical zoom (×12),
giving
×48 zooming at maximum.
Select the magnification of the electronic zoom
×4 or ×2
by LIMIT.
Note
Regardless of the D-ZOOM ON/OFF setting, images
shot by the camera are accumulated for the vertical
synchronization period and output from the VIDEO and
S VIDEO connectors of the camera and the connector on
the optional interface card inserted into the card slot.
>PAN-TILT LIMIT
PAN
LEFT
RIGHT
TILT
DOWN
UP
D-ZOOM
LIMIT
ON
END
END
ON
END
END
ON
x4
+35359 STEP -35241 STEP
CENTER (±0°)
RIGHT END
(170°) LEFT END
(170°)
UP END (90°)
±0°
-06170 STEP
+18630 STEP
DOWN END (30°)