Pan/tilt and zoom operation, Panning and tilting, If you accidentally move the camera with your hand – Sony BRC-300P User Manual
Page 36
O
p
e
rat
ion Using t
he RM-B
R30
0
Remot
e
Cont
rol Unit
Pan/Tilt and Zoom Operation
36
3
Hold down the RESET button and press the
POWER button on the Remote Control Unit.
The Remote Control Unit recognizes the connected
cameras and assigns them camera addresses 1 to 7
automatically in the connected order.
4
Press the POWER button on the Remote Control
Unit and check that the CAMERA buttons light.
The number of the lit CAMERA buttons indicates
how many cameras have the addresses assigned.
Now you can switch the camera you want to control
with the Remote Control Unit by pressing the
CAMERA button.
To assign camera addresses manually
Set one of the camera addresses, 1 to 7, using the camera
address selectors on the bottom of each camera.
For setting the camera address selectors, see page 16
Pan/Tilt and Zoom
Operation
Panning and Tilting
1
Turn on the power of the camera and the RM-
BR300 Remote Control Unit.
The camera will turn on, performing the pan/tilt
reset action automatically.
2
Press the CAMERA button corresponding to the
camera you want to operate.
3
Operate the joystick to pan or tilt the camera.
While checking the picture on the screen, incline
the joystick in the desired direction.
The panning/tilting speed changes according to the
angle at which you incline the joystick.
Release the joystick to stop panning/tilting.
To face the camera back to the front
Press the button on the top of the joystick for one or two
seconds.
If you accidentally move the camera with
your hand
Press the PAN-TILT RESET button to perform the pan/
tilt reset action.
1
1
9
LOCK
MODE
VALUE
RESET
MENU
PRESET
SHIFT
L/R
DIRECTION
PANEL
LIGHT
BLACK
LIGHT
PAN-TILT
RESET
ONE PUSH
AWB
POWER
AUTO
MANUAL
AUTO
ONE PUSH
AF
2
3
4
5
6
7
2
10
STD
REV
3
11
4
POSITION
CAMERA
12
5
13
6
14
7
15
8
16
R
–
+
BRIGHT
B
–
+
FOCUS
NEAR
FAR
3
2
1
L/R DIRECTION
STD
REV
PAN-TILT RESET
POWER
Press for 1 or 2 seconds.