Sharp FO-6700 - Manual (Page 174)

Optional Settings
172
Setting 32: COPY RESOLUTION
Use this setting to select the default copying resolution (the resolution
used for copying if a setting is not made with the RESOLUTION
key). Press 1 (S-FINE) to set the default resolution to SUPER FINE,
or 2 to set it to FINE.
♦ Initial setting: 2
Setting 33: SEPARATE MODE
If desired, you can have the fax automatically draw a sheet of paper
from the paper tray after each fax reception. By loading colored (or
large) paper in the paper tray, each colored sheet drawn will act as a
separator that makes it easy to distinguish where one multi-page
document ends and another begins. A Transaction Report printed after
a reception will also be printed from the paper tray to act as a
separator sheet. Press 1 to turn on this function (be sure to load
appropriate paper in the paper tray), or 2 to turn it off. (Note that this
function will not operate for copy jobs. The function will turn off
automatically if the paper tray runs out of paper.)
♦ Initial setting: 2
Note: If you change the Separate Mode setting, Option Setting 16 will
subsequently appear in the display to allow you make an appropriate
setting for Cassette Selection.
Setting 34: POWER SAVE TYPE
This option sets the method for turning on Power Save Mode. Press 1
to select REAL TIME (turn Power Save Mode on and off by pressing
the POWER SAVE key), or 2 to select TIMER (automatic on and off
at preset times). For more information, see Power Save Mode in
Chapter 5.
♦ Initial setting: 1
all-FO6700.book Page 172 Wednesday, August 30, 2000 1:17 PM