Sharp FO-6700 User Manual

Page 173

Optional Settings

171

6. O

Setti

ngs

Setting 31: DIAL SELECTION
If the dual line option has been installed, you can use this setting to
specify how each line will be used. Reception only, transmission only,
or free (both reception and transmission are allowed) can be selected.

Enter a number from 1 to 7 as follows:

♦ Initial setting: 1

Note:

The Dial Selection setting will only appear if your dealer has

installed the dual line option.

Note:

If you set a line to “reception only” and Rapid Key or Speed

Dial numbers exist that specify use of that line, INVALID LINE SET
IN RAPID/SPEED # will appear in the display. Press 1 to change the
line selections in the Rapid Key or Speed Dial numbers to “no
selection”, or press 2 to cancel the “reception only” selection for the
line.

Note:

A line cannot be set to “transmission only” if it is being used for

FAST remote maintenance by your dealer.

1 (L1=TX/RX, L2=TX/RX): Both lines free

2 (L1=TX/RX, L2=RX):

Line 1 free, Line 2 reception only

3 (L1=TX/RX, L2=TX):

Line 1 free, Line 2 transmission only

4 (L1=RX, L2=TX/RX):

Line 1 reception only, Line 2 free

5 (L1=RX, L2=TX):

Line 1 reception only, Line 2 transmission
only

6 (L1=TX, L2=TX/RX):

Line 1 transmission only, Line 2 free

7 (L1=TX, L2=RX):

Line 1 transmission only, Line 2 reception
only

all-FO6700.book Page 171 Wednesday, August 30, 2000 1:17 PM