Sharp FO-6700 - Manual (Page 100)

Subaddressing Transmission
98
2
Press the 2 key.
The display will show:
TX TABLE #=01
ENTER TABLE NAME
2: TX TABLE SET
ENTER #(01-20)
2
3
Enter a 2-digit number from 01 to 20.
This number identifies the
transmission table.
(Note: This table number is only used
by your machine. It is not used by the
receiving machine.)
The display will show:
(Example)
0 1
4
Press the letter entry keys to enter a
name for the transmission table.
• If you don’t want to enter a name,
go directly to Step 5.
Example: SHARP
A S H R P
5
Press the START key.
The display will show:
TX TABLE #=01
ENTER SUBADDRESS
START
all-FO6700.book Page 98 Wednesday, August 30, 2000 1:17 PM