Sharp FO-6700 - Manual (Page 166)

Optional Settings
164
Setting 04: AUTO LISTING
Press 1 (YES) to have the fax machine automatically print an Activity
Report once every 50 send/receive operations. (The report can still be
printed on demand at any time.) Press 2 (NO) to turn the function off.
♦ Initial setting: 2
Setting 05: TRANSACTION REPORT PRINT SELECTION
This sets the condition for printing out a Transaction Report. Enter a
number from 1 to 5 as follows:
♦ Initial setting: 5
Setting 06: RECALL TIMES
This sets the maximum number of times your fax will automatically
redial if the line is busy. Enter any number from 00 to 14.
♦ Initial setting: 02
Setting 07: RECALL INTERVAL
This sets the amount of time your fax will wait between automatic
redials when the line is busy. Enter 01 for 1 minute, 02 for 2 minutes,
etc., up to a maximum of 15 minutes.
♦ Initial setting: 05
1 (ERROR/TIMER
MEMORY): A report will be printed after an error,
timer operation, or memory operation
2 (SEND ONLY) A report will be printed only after a
transmission
3 (ALWAYS PRINTS) A report will be printed after each
transmission, reception, or error
4 (NEVER PRINTS) A report will never be printed.
5 (ERROR ONLY) A report will be printed only after an error
occurs
.
all-FO6700.book Page 164 Wednesday, August 30, 2000 1:17 PM