Sharp FO-6700 User Manual

Page 167

Optional Settings

165

6. O

Setti

ngs

Setting 08: SECURITY SELECTION
Press 1 (ON) to turn polling security on, or 2 (OFF) to turn it off.

♦ Initial setting: 1

Setting 09: ERROR CORRECTION MODE (ECM)
Press 1 (YES) to have any distortions in a transmission due to noise on
the telephone line corrected before print-out at the receiving end. This
is only effective when the other machine has ECM as well. Press 2
(NO) to turn the function off.
Note:

If the transmission or reception is taking place in Super G3

mode, ECM will operate regardless of the ECM setting.

♦ Initial setting: 1

Setting 10: AUTO COVER SHEET
Press 1 (YES) to have the fax automatically generate a cover sheet and
send it as the last page of each transmission. Press 2 (NO) to turn the
function off.

♦ Initial setting: 2

Setting 11: MEMORY SCANNING
Use this setting to have the fax reduce the size of documents wider
than 8.9" (226 mm) when it scans them into memory for transmission.
Press 1 to turn off the function or 2 to turn it on. Note that if 1 (1:1) is
selected, the document will be stored at actual size, and if the
receiving machine only uses 8.3" (210 mm) paper, the parts outside of
that width will not be printed.

♦ Initial setting: 2

Setting 12: COPY SCANNING
This setting is used to reduce copies slightly before printing to ensure
that data on the edges are not cut off. Press 1 (AUTO) for automatic
reduction, or 2 (100%) for no reduction.

♦ Initial setting: 2

all-FO6700.book Page 165 Wednesday, August 30, 2000 1:17 PM