Symbol Technologies LS 3070 - Manual (Page 33)

4-4
LS 3070 Product Reference Guide: Maintenance and Specifications
Charge Status LED Indications
On the base/charger, there is a red LED indicator which uses flashing patterns
to indicate the current charger status. The red Charge Status LED indicates the
following conditions:
• RED LED OFF — The scanner is not properly inserted or the battery is
not functioning properly.
• RED LED blinking slowly (1/8 sec. ON, 3/8 sec. OFF) — Battery charge
is pending. This can occur if the batttery temperature is too high or low
or if the battery is deeply discharged. After several minutes, normal
charging should begin.
• RED LED ON — The battery is actively charging. Charging will complete
in less than 2 hours.
• RED LED blinking rapidly (1/8 sec. ON, 1/8 sec. OFF) — Battery
charging is complete.