Symbol Technologies LS 3070 - Manual (Page 170)

7-75
LS 3070 Product Reference Guide: Programming
OCIA Transmit Timeout
To set an OCIA Transmit Timeout
1. Scan the OCIA TRANSMIT TIMEOUT bar code below.
2. Scan two bar codes from the next two pages which represent the desired
timeout - Between 3 and 30 seconds. You must always scan two bar codes.
For a timeout less than 10 seconds, scan a leading “0”
.
3. If you make an error, or wish to change your selection, scan CANCEL.
OCIA TRANSMIT TIMEOUT