Appendix, How to use usb memory, Save the wireless and tcp/ip settings – Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W User Manual
Page 63: For the pricom c-6400w to use usb memory, Write configuration information using an editor, Using a standard os print client, Print using the windows 2000 lpr port, Print using the windows xp lpr port, Print using the windows 2000, windows xp ipp port, Connect to the pricom c-6400w form a web browser
1
Appendix
Users Manual CX2
How to use USB memory
This section will explain how to configure the PRICOM C-6400W by using USB memory.
By connecting USB memory to the PRICOM C-6400W, the wireless and TCP/IP settings
saved on the USB memory will configure the PRICOM C-6400W.
Save the wireless and TCP/IP settings for the PRICOM C-6400W to
use USB memory
Once the settings are saved to USB memory, the USB memory can be used to configure the
PRICOM.
- To configure the PRICOM C-6400W in Windows 2000, Windows XP you must have Administrator
rights.
- This functionality requires software version 1.2.0 or newer.
1.
Start the PRICOM User Software CX2.
- If the screen dose not appear
automatically, execute
Autorun .exe
from the CD-ROM.
2.
Click
PRICOM Setup.
The screen on
the right will appear. Check
Setup
PRICOM by USB memory
then click
Next
.
Appendix