Sony DHG-HDD250 - Manual (Page 33)

Connections
27
CableCARD™ Messages
Here are some of the messages you might see on your screen. When you see them, follow the
actions required.
Message Do This...
Make sure you have a
cable connection. Please
wait while the
CableCARD defines your
channel list. If your CableCARD device is inserted correctly, select OK to
remove the message or let the message automatically
disappear when the channel list is defined.
Acquiring data from
CableCARD Please
standby... Wait for the screen to display
Digital Channels Found: xxx
Analog Channels Found: xxx
If a list of channels is not found after several minutes, then
an error message will be displayed.
CableCARD Error. No
channels were found. Select OK to remove the message and then contact your cable
TV service provider to resolve the issue. If you see this
message while you are running Wizard, complete the setup
first and then contact your cable TV service provider.
CableCARD removed. Do
you want to run Auto
Scan now? Select Yes to display the Auto Scan screen and to start Auto
Scan.
Select No to cancel the Auto Scan.
Please wait while your
CableCARD updates. Do not remove the card while receiving updates. Wait for the
update to complete.