Siemens CCIC1410 - Manual (Page 84)

Configuration with the CCIC1410 Homepage
84
Siemens Building Technologies
Fire Safety & Security Products 05.2009
1.
Open the CCIC1410 Homepage (see chapter 9.1).
2. Choose the Configuration menu.
3. On the left hand side, choose the menu item Maintenance.
4. In the Restore section, mark/unmark the checkboxes for Network Type and
Daylight saving time.
Î Network Type:
Select this option to retain the Network Type settings. Please refer to chapter
9.7.1: Network type.
Î Daylight saving time:
Select this option to retain the daylight saving time settings (see chapter 9.5.1:
System.
If none of the options is selected, all settings will be reset to the factory
default.
5. Click Restore.
Î The following message is displayed during the restoring process.
9.16.3 Upload / export daylight saving time configuration file
This feature allows you to set the starting time and ending time of DST.
Export daylight saving time configuration file
1.
Open the CCIC1410 Homepage ( see chapter 9.1).
2. Choose the Configuration menu.
3. On the left hand side, choose the menu item Maintenance.
4. In the Export Daylight Saving Time Configuration File section, click Export
to export an *.xml-file from the network camera.
5. Open the *.xml-file using Microsoft® Notepad and locate your time zone; set
the starting time and ending time of the DST.
6. Click Save.