Siemens CCIC1410 - Manual (Page 56)

Configuration with the CCIC1410 Homepage
56
Siemens Building Technologies
Fire Safety & Security Products 05.2009
9.7.3 FTP
The FTP server allows the network camera to utilize the SIEMENS CCIC1410
Installation Wizard to upgrade the firmware. The FTP port is set to 21 by default. It
can however be assigned any other port number between 1025 and 65535.
1.
Open the CCIC1410 Homepage (see chapter 9.1).
2. Choose the Configuration menu.
3. On the left hand side, choose the menu item Network.
4. Define the settings.
5. Click Save.