8 client settings, 1 stream options, 2 mpeg4 media options – Siemens CCIC1410 User Manual
Page 38: 3 mpeg4 protocol options (transmission modes)
CCIC1410 Installation Wizard
38
Siemens Building Technologies
Fire Safety & Security Products
05.2009
8.8 Client
settings
8.8.1 Stream
options
1.
Open the CCIC1410 Homepage (see chapter 9.1).
2.
Choose the Client Settings menu.
The network camera supports MPEG-4 and MJPEG dual streams.
3.
Choose the stream to be shown in the client.
4.
Click Save.
8.8.2
MPEG4 media options
1.
Open the CCIC1410 Homepage (see chapter 9.1).
2.
Choose the Client Settings menu.
3.
Select whether video only, audio only or video and audio will be streamed.
This will work only when the video mode is set to MPEG4.
4.
Click Save.
8.8.3
MPEG4 protocol options (transmission modes)
1.
Open the CCIC1410 Homepage (see chapter 9.1).
2.
Choose the Client Settings menu.
3.
Choose a transmission mode.
4.
Click Save.
Depending on your network environment, there are four transmission modes of
MPEG4 streaming: