Siemens CCIC1410 - Manual (Page 74)

Configuration with the CCIC1410 Homepage
74
Siemens Building Technologies
Fire Safety & Security Products 05.2009
9.13 Application settings
This section explains how to configure the network camera to react in response to
particular situations. A typical application is that when a motion is detected, the
network camera sends buffered images to a FTP server or via e-mail as
notifications.
1.
Open the CCIC1410 Homepage (see chapter 9.1).
2. Choose the Configuration menu.
3. On the left hand side, choose the menu item Application.
4. Choose the desired settings.
5. Click Add or Delete.
In the illustration above, an event can be triggered by many sources, such as
motion detection or external digital input devices. When an event is triggered, you
can specify what kind of action will be performed. You can configure the network
camera to send snapshots or videos to your email address or FTP site.
To configure an event, it is recommended to configure the server and media
settings first so that the network camera will know what action shall be performed
when a trigger is activated.