Siemens CCIC1410 User Manual
Page 66
Configuration with the CCIC1410 Homepage
66
Siemens Building Technologies
Fire Safety & Security Products
05.2009
Power line frequency:
Select the appropriate power line frequency for your location to eliminate image
flickering. Note that after the power line frequency is changed, it is required to
disconnect and reconnect the power cord of the network camera in order for the
new setting to take effect.
Video orientation:
"Flip" vertically reflects the display of the live video. "Mirror" horizontally reflects the
display of the live video. Select both options if the network camera is installed
upside-down (e.g. on a ceiling) to correct the image orientation.
Maximum exposure time:
1/30 S, 1/15 S, and Auto.
Overlay title and time stamp on video:
Select this option to insert the video title and time in the video stream. Note that
when the image size is set to 176 x 144, only the time will be stamped on video
streams.
Image Settings
Click Image Settings to open the image settings page. In this page, you can fine-
tune white balance, brightness, saturation, contrast, and sharpness for video
compensation.
–
Brightness:
Adjust the image brightness level, which ranges from -5 to +5. The default value
is set to 0.