Siemens CCIC1410 - Manual (Page 19)

Installation
19
Siemens Building Technologies
Fire Safety & Security Products 05.2009
7.1.1 Internet connection via a router
Before setting up the network camera over the Internet, make sure you have a
router, and follow the steps below.
1.
Connect your network camera behind a router. The Internet environment is
illustrated as below. For information on how to obtain an IP address, see
chapter 8.5: Network settings.
2. In this example, the Local Area Network (LAN) IP address of your network
camera is 192.168.0.3. Please forward the following ports for the network
camera on the router.
– HTTP port
– RTSP port
– RTP port for audio
– RTCP port for audio
– RTP port for video
– RTCP port for video
If you have changed the port numbers on the Network page, please open the
ports accordingly on your router. For information on how to forward ports on
the router, please refer to the user’s manual of your router.
3. Find out the public IP address of your router provided by your ISP (Internet
Service Provider). Use the public IP and the secondary HTTP port to access
the network camera from the Internet (see chapter 9.7.1: Network type).