Siemens CCIC1410 - Manual (Page 53)

Configuration with the CCIC1410 Homepage
53
Siemens Building Technologies
Fire Safety & Security Products 05.2009
9.7 Network connection settings
9.7.1 Network type
1. Open the CCIC1410 Homepage (see chapter 9.1).
2. Choose the Configuration menu.
3. On the left hand side, choose the menu item Network.
4. Define the settings.
5. Click Save.
LAN Select this option when the network camera is deployed in a local area
network (LAN) and is intended to be accessed by local computers.
Get IP address
automatically Select this option to obtain an available
dynamic IP address assigned by a DHCP
server each time the camera is connected to
the LAN.
Use fixed IP address Select this option to manually assign a static IP
address to the network camera.
Enable UPnP
presentation Select this option to enable UPnP™
presentation for your network camera so that
whenever a network camera is presented to
the LAN, shortcuts of connected network
cameras will be listed in My Network Places.
Currently, UPnP™ is supported by Windows
XP or later. Note that to utilize this feature,
please make sure the UPnP™ component is
installed on your computer.