Siemens CCIC1410 User Manual
Page 60
Configuration with the CCIC1410 Homepage
60
Siemens Building Technologies
Fire Safety & Security Products
05.2009
Wireless mode:
Click on the pull-down menu to select from the following options:
z
Infrastructure:
The network camera is connected to the WLAN via an Access Point (default
setting).
z
Ad-Hoc:
The network camera is connected directly to a host equipped with a wireless
adapter in a peer-to-peer environment.
Channel:
While in infrastructure mode, the channel is selected automatically to match the
channel setting for the selected Access Point. In Ad-Hoc mode, the channel must
be manually set to the same channel for each wireless adapter. The default
channel setting depends on the regional settings.
TX rate:
This field is for selecting the maximum transmission rate on the network. The
default setting is “Auto”, which means that the network camera will try to connect to
the other wireless device at highest transmission rate.
Security:
Select the data encrypt method. There are four types from low to high: none, WEP,
WPA-PSK, and WPA2-PSK.
z
Security: None:
No data encryption.