3 service and maintenance, 4 cleaning of the device, 5 software – Siemens CCIC1410 User Manual
Page 6
Safety
6
Siemens Building Technologies
Fire Safety & Security Products
05.2009
Radio interference with other devices in the environment
z
In France, it is not allowed to use the CCIC1410-LAW outside buildings and on
the channels 10 – 13.
z
The unit operates on frequencies that are approved for use in the European
Union. When used outside the EU, the national regulations for the use of
frequencies must be observed.
Damage due to unsuitable mounting location
z
The environmental conditions recommended by the manufacturer must be
observed.
z
Do not operate the device close to sources of powerful electromagnetic
radiation.
z
Do not operate the device in dusty places.
z
The device should only be used for indoor applications.
z
Do not expose the device to mechanical vibrations or shocks.
z
Protect the device against moisture.
Danger of electrical shock due to incorrect connection
z
Connect the device only to a limited power source.
z
This device is designed to work with 5 V DC-systems. Do not connect the device
to any other power systems.
Risk of cable damage due to stress
z
Make sure that all outgoing cables and wires are sufficiently strain-relieved.
z
Make sure that cables are not under stress, kinked or damaged.
1.2.3
Service and maintenance
z
Do not attempt to service or modify this device yourself. Refer this work to
qualified service personnel.
1.2.4
Cleaning of the device
Do not touch the imaging surface of the sensor. Use a soft cloth moistened with
alcohol to clean the surface if it is touched accidentally.
1.2.5 Software
Damage during transport
z
Always transport the CD in the case it originally came in.
Data loss after software update
z
Make sure to backup all data before updating the software.
Damage due to improper handling
z
Protect the CD from scratching.
z
To clean the CD use a soft dry cloth.