Samsung SHR-3040 User Manual
Page 61
English
_1
!
weB viewer
setuP
Click
You must adjust the transfer settings according to the network
environment.
Quality: You can set the recording quality.
For more information, refer to “
RECORD > RECORD SETUP”.
(page 28)
Frame Rate: Set the frame rate per second for a video.
For more information, refer to “
RECORD > RECORD SETUP”.
(page 28)
Bandwidth: You must set the upload speed according to the
network environment of the current DVR.
Read: Loads the settings of the connected DVR into the Web Viewer.
Write: Saves the Web Viewer settings in the DVR.
If the network setup of Remote Viewer is changed, the record setup will be changed accordingly.
As Remote Viewer uses a single codec with no separate codec for the network service, a change to the frame
rate and quality via the network will change the recording frame rate and quality accordingly.
Only the “
admin” user account can access the “SETUP” menu.
~
`
~
`
~
~
~
M
`
J
`
02489A_SHR-3040_ENG.indb 61
2009-11-10 오후 2:14:21