Schedule setup – Samsung SHR-3040 User Manual
Page 29
English
_
!
setuP
PRE ALARM RECORD: In event recording, set the advance recording time before an actual event.
Pre alarm settings will be changed according to the frame rate.
HDD REMAINING: Shows the remaining and total capacity of the current HDD.
TIME REMAINING: Displays the expected recordable time in the “Date(D)/HOur(H)/miN(m)” format
based on the selected quality.
When done, select
Your setting will be applied.
If you select
To return to the previous menu, select
schedule setup
You can set the recording schedule.
See the previous section to repeat steps 1~3. (Page 28)
Use the up/down ($%) button to select
The “scHeDule setuP” screen appears.
Use the direction ($%_ +) buttons to move to a desired
box, and press [OK].
Each time you press the button, the box setting will switch
to “cONtiNue > mOtiON > alarm > mOtiON &
alarm > stOP recOrDiNG” in sequence.
ALL: Select this to set the entire week.
DAY: Select this to set a specifi c day of the week.
HOUR: Select this to set the time range.
You can set the time range by the two hours.
You can use the left and right buttons of the mouse to make a desired schedule.
Each time you press the left button of the mouse, the box item will switch to “
CONTINUE > MOTION > ALARM >
MOTION & ALARM > STOP RECORDING” in sequence.
Each time you press the right button of the mouse, the box item will switch to “
STOP RECORDING > MOTION&ALARM >
ALARM > MOTION > CONTINUE” in sequence.
When done, select
Your setting will be applied.
If you select
To return to the previous menu, select
~
J
`
~
~
.
.
.
.
~
~
~
M
`
-
-
.
.
SCHEDULE SETUP
DEFAULT
ESC
OK
ALL
SUN
MON
TUE
WED
THU
FRI
SAT
0 0 0 2 0 4 0 6 0 8 1 0 1 2 1 4 1 6 1 8 2 0 2 2
RECORD
ESC
RECORD SETUP
SCHEDULE SETUP
02489A_SHR-3040_ENG.indb 29
2009-11-10 오후 2:13:37