Samsung SHR-3040 - Manual (Page 32)

_ setup
setup
motion setup
You can specify an area to detect a motion.
If you select an area to detect a motion, the DVR will detect any motion occurring in that area.
See the previous section to repeat steps 1~3. (Page 30)
Use the up/down ($%) button to select
setuP>, and press [OK].
The “mOtiON setuP” screen appears.
Use the up/down ($%) button to move to a desired item.
CHANNEL: Select a channel to set the motion detection.
SENSITIVITY: Adjust the sensitivity of the motion detection.
If the level increases from 1 to 6 one by one, the sensitivity
will be increased accordingly.
DURATION: Set the recording duration from the moment a motion is
detected. You can specify the duration between 2 and 99 seconds.
SIZE: Specify the number of cells to be selected at once.
Ex) If you select 3, a total of 9 cells (3X3) will be selected.
Use the four direction ($%_ +) buttons and press [OK]
to set the motion area.
Motion detection is activated for the area that is selected in red.
By default, all cells are set to disabled.
If you use the cursor to set the motion area, select a cell and set it to ‘ACTIVE/INACTIVE’.
Left-click a cell and drag it until a desired cell block is shaped.
When a desired block is selected, release the left button of the mouse.
When done, select .
Your setting will be applied.
If you select , the selected channel will be reset to the default, and if selecting , all
the channels will be reset to the factory default.
To return to the previous menu, select .
alarm setup
You can set the input system of the alarm that is connected to the DVR.
See the previous section to repeat steps 1~3. (Page 30)
Use the up/down ($%) button to select
setuP>, and press [OK].
The “alarm setuP” screen appears.
.
.
~
~
~
~
.
`
`
.
.
.
CONFIGURATION
ESC
HDD MANAGEMENT
CAMERA SETUP
MOTION SETUP
ALARM SETUP
INTERVAL SETUP
DATE/TIME SETUP
PASSWORD SETUP
BUZZER SETUP
CONFIGURATION
ESC
HDD MANAGEMENT
CAMERA SETUP
MOTION SETUP
ALARM SETUP
INTERVAL SETUP
DATE/TIME SETUP
PASSWORD SETUP
BUZZER SETUP
MOTION SETUP
DEFAULT ALL-DEFAULT ESC
CHANNEL
SENSITIVITY
DURATION
SIZE
OK
CH1
6
05
2
02489A_SHR-3040_ENG.indb 32 2009-11-10 오후 2:13:43