2. separation of components – Sony PCS-1P User Manual
Page 32
2-2
PCS-1/PCS-1P
2-2. Separation of Components
The main troubles that occur during failure are described in the table below.
Trouble
1.
The power is not turned on even if the power switch on the side panel is pressed.
SS-01
2.
The power is not turned on even if the power button of a remote controller is pressed.
SS-02
3.
The power is not turned on during automatic incoming. (ISDN)
SS-03
4.
The power is not turned on during automatic incoming. (LAN)
SS-04
5.
The power of a monitor television is not turned on during the power-on sequence.
SS-05
6.
The image from a camera is not displayed after the power is turned on.
SS-06
7.
No function can be operated using a remote controller.
SS-07
8.
The camera on the local side cannot be operated.
SS-08
9.
No line is connected. (ISDN)
SS-09
10.
No line is connected. (LAN)
SS-10
11.
No voice can be heard from the remote side after a line is connected.
SS-11
12.
No voice can be transmitted to the remote side after a line is connected.
SS-12
13.
No video input (object, AUX1, or AUX2) image can be displayed. The image of
SS-13
a camera is displayed.
14.
An image on the remote side is not displayed after a line is connected.
SS-14
15.
An image cannot be transmitted to the remote side after a line is connected.
SS-15