Sony PCS-1P - Manual (Page 14)

1-10
PCS-1/PCS-1P
1-4. Initialization
1-4-1. Inserting Batteries into the Remote
Commander
Most of the operations with the Video Communication
System can be controlled with the supplied Remote
Commander.
1. Remove the battery compartment cover.
2. Insert two size AA (R6) batteries (supplied) with
correct polarities into the battery compartment.
n
Be sure to insert the batteries
_ side first. Inserting them
forcibly + side first may damage the insulated film
covering the batteries and cause a short circuit.
3. Replace the cover.
m
Battery life
When the Remote Commander does not function properly,
replace both the batteries with new ones.
Notes on batteries
. To avoid damage from possible battery leakage or
corrosion, observe the following:
. Make sure to insert the batteries with the polarities in the
correct direction.
. Do not mix old and new batteries, or different types of
batteries.
. Do not attempt to charge the batteries.
. If you do not intend to use the Remote Commander for a
long period of time, remove the batteries.
. If battery leakage occurs, clean the battery compartment
and replace all the batteries with new ones.