Sony PCS-1P User Manual
Page 23
1-19
PCS-1/PCS-1P
Contents of setting
Set the user number (E.164 number) registered in a gate keeper.
Set to “On” when enabling the service of an SNMP (Simple Network Management
Protocol) agent. Set to “Off” when disabling it.
Set the IP address of an SNMP manager that transmits a trap.
Set the community name that an SNMP manager manages. Usually, set to
“Public”.
This is the description of this device. It has been input as “Videoconference
Device”. Cannot be changed.
Set the place in which this unit is installed.
Set the information on the administrator of this unit.
Set to “On” when connecting this unit to the local network in which NAT
(Network Address Translation) was used. Set to “Off” when not connecting it.
Set the IP address on the global side that NAT uses.
Used for future function expansion.
Set to “On” when always optimizing the LAN band used. Set to “Off” when not
optimizing it.
Select whether to fix the TCP port number and UDP port number.
User setting: The port number that the user sets is used.
Default value: The default port number is used. TCP port number 2253 and UDP
port number 49152 are set.
Set the TCP port number when “Port number used” is “User setting”.
Set the UDP port number when “Port number used” is “User setting”.
Display whether a camera remote control can be performed.
Display whether a T.120 data conference can be performed.
Display the line interface used.
Display the number of connected lines and the transmission rate during
communication.
Display whether data solution box PCS-DSB1 can be used.
Used for future function expansion.
Display the current audio coding system.
Display the current video coding system.
Display the maximum frame rate of a motion picture.
Display the data transmission rate of LSD.
Display the data transmission rate of MLP.
Display the data transmission rate of HMLP.
The software version of a communication terminal is displayed.
The version of connected ISDN unit PCS-B768 is displayed.
The version of connected data solution box PCS-DSB1 is displayed.
The version of a video and audio codec is displayed.
The type of installed optional MCU software is displayed.
The connected optional equipment is displayed.
The host name is displayed.
The IP address is displayed.
The MAC address is displayed.
The serial number is displayed.
Initial value
Blank
Off
Blank
Public
Videoconference
Device
Blank
Blank
Off
Blank
Blank
Off
Default value
Blank
Blank
Setting of LAN
Communication
state
Information
User number
SNMP service
Trap transmission
destination
Community name
Description of device
Installation place
Contact of administrator
NAT setting
NAT address
Packet retransmission
request
Optimum rate control
Port number used
TCP port number
UDP port number
Remote camera control
T.120 data
Line I/F
Line rate
DSB
White board
Audio coding system
Video coding system
Video frame rate
LSD rate
MLP rate
HMLP rate
Host version
ISDN UNIT version
DSB version
DSP version
Software option
Option I/F
Host name
IP address
MAC address
Serial number
Item
(
*1)
(
*
1) : Displayed with the transmission and reception columns divided. The setting state of this side is displayed on the transmission column, and the reception
enable state of this side is displayed on the reception column.