beautypg.com

Sony PCS-1P User Manual

Page 18

background image

1-14

PCS-1/PCS-1P

Language Setup Wizard

Cancel

Next

English

Language

1-4-6. When the Power was First Turned on

after Installation

When you turn on the Communication Terminal for the

first time after installation and the self-diagnosis is
completed, the setup wizard appears on the monitor screen.

Register your local system data with the setup wizard using
the Remote Commander.

n
You can change the settings made with the setup wizard
later using the Setup menus.

1.

Select the language used for the on-screen menus and

messages in the Language Setup Wizard.
Language: Select one of seven languages; English,

French, German, Japanese, Spanish, Italian, Chinese.

2.

Use the

,

,

or

button on the Remote

Commander to select “Next”, then press the PUSH
ENTER button.

The ISDN Setup Wizard appears.
n
When you are not using the ISDN line, select “Next”
to display the LAN Setup Wizard, then proceed to step

9.

ISDN Setup Wizard

Cancel

Next

Previous

USA

Country/Region

1

Country/Region Code

National ISDN

Protocol

3.

Set the following items on the ISDN line.

Country/Region:

Select your country or region.
Country/Region Code:

Enter your country code or region code with the
number buttons on the Remote Commander.

Protocol:
Select the protocol of the ISDN line you are using.

4.

Use the

,

,

or

button to select “Next”, then

press the PUSH ENTER button.

This manual is related to the following products: