Sony PCS-1P - Manual (Page 20)

1-16
PCS-1/PCS-1P
LAN Setup Wizard
Cancel Next Previous
Auto DHCP Mode
Host Name
IP Address
Network Mask
Gateway Address
DNS Address
. . .
. . .
. . .
. . .
9. Set the following items on the LAN.
DHCP Mode:
Sets the DHCP (Dynamic Host Configuration Protocol).
Auto:
Automatically assigns your IP address, network mask,
gateway address and DNS address.
Off:
Deactivates DHCP. In this case set your IP address,
network mask, gateway address and DNS address
manually.
Host Name:
Enter your host name.
IP Address:
Enter your IP address.
Network Mask:
Enter your network mask.
Gateway Address:
Enter your default gateway address.
DNS Address:
Enter your DNS (Domain Name System) server
address.
n
When you set “DHCP Mode” to “Auto”, the assigned
IP address is shown in the launcher menu or Machine
Information menu.
When you do not know how to set up the LAN
configuration, contact your network administrator.
10. Use the
↑
,
↓
,
←
or
→
button to select “Next”, then
press the PUSH ENTER button.
The message window for confirmation appears.
Cancel Previous
Save
11. Use the
↑
,
↓
,
←
or
→
button to select “Save”, then
press the PUSH ENTER button.
The settings are saved.
To cancel the setting
Press the
↑
,
↓
,
←
or
→
button to select “Cancel”, then
press the PUSH ENTER button.
To go back to the previous wizard
Press the
↑
,
↓
,
←
or
→
button to select “Previous”, then
press the PUSH ENTER button.