13 fog alert tone frequency, 14 external speaker selection – Standard Horizon PHANTOM Series PS2000 User Manual
Page 56

Phantom PS2000
Page 56
12.13 FOG ALERT TONE FREQUENCY
This selection allows you to select the Alert Tone Frequency for the PA/FOG
Operation. Available selections are “200 Hz” through “850 Hz” in 50 Hz steps.
The default Alert Tone Frequency is 400 Hz.
1. Press and hold down the [CALL(SET)MENU] key until
“
RADIO SETUP
” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [
] or
[
] key to select “
FOG FREQ
” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [
] or [ ] key to select desired tone frequency.
5. Press the [CALL(SET)MENU] key.
6. Press the [CALL(SET)MENU] key to store the selected set-
ting.
7. Press the [16/9] key to return to radio operation.
12.14 EXTERNAL SPEAKER SELECTION
This selection allow the CMP25 RAM+ internal speaker to be turned off and so
an external speaker can be used. For connection of an external speaker refer
to page 11.
1. Press and hold down the [CALL(SET)MENU] key until
“
RADIO SETUP
” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [
] or
[
] key to select “
EXT SPK
” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [
] or [ ] key to select “
on
” or “
of
.”
“
on
”: EXT. speaker “on,” CMP25 RAM+ internal speaker “off”
“
oF
”: EXT. speaker “off,” CMP25 RAM+ internal speaker “on”
5. Press the [CALL(SET)MENU] key to store the selected set-
ting.
6. Press the [16/9] key to return to radio operation.