Standard Horizon PHANTOM Series PS2000 - Manual (Page 52)

Phantom PS2000 Page 52
12.6 CHANGING COG TO TRUE OR MAGNETIC
Allows customizing the NAV data showing GPS Course Over Ground (COG).
Factory default is “True,” however, following the steps below the COG can be
changed to “Magnetic.”
1. Press and hold down the [CALL(SET)MENU] key until
“ RADIO SETUP ” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [ ] or
[ ] key to select “ MAGNETIC ” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [
] or [ ] key to select “ on (Magnetic)” or “ of
(True).”
5. Press the [CALL(SET)MENU] key to store the selected set-
ting.
6. Press the [16/9] key to return to radio operation.
In the “True” mode, the display shows direction with “ T .” Mean-
while, the the display shows with “ M ” in the “Magnetic” mode.
12.7 PRIORITY CHANNEL SET
Allows selection of the priority channel.
1. Press and hold down the [CALL(SET)MENU] key until
“ RARIO SETUP ” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [ ] or
[ ] key to select “ PRIORITY CH ” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [
] or [ ] key to select the channel to be a prior-
ity.
5. Press the [CALL(SET)MENU] key to store the selected set-
ting.
6. Press the [16/9] key to return to radio operation.
“True” mode “Magnetic” mode