7 changing the gps time – Standard Horizon PHANTOM Series PS2000 User Manual
Page 14

Phantom PS2000
Page 14
8.7 CHANGING THE GPS TIME
You may select the time display between “Local time” and “UTC time” (GPS
sends to Phantom PS2000). Time is displayed when GPS position (LAT/LON)
is displayed by pressing the [NAV] key on the RAM+ mic.
1. On the RAM+ mic, press and hold down the [CALL(SET)MENU] key until
“
RARIO SETUP
” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [
] or
[
] key to select “
LOCAL TIME
” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [
] or [ ] key to select “
oF
” (GPS Time dispaly)
or “
on
” (Local Time dispaly).
5. Press the [CALL(SET)MENU] key to store the selected
setting.
6. Press the [16/9] key to return to radio operation.
If you change the time display to “Local time,” you need change
the time offset to show the local time correctly in your area.