Standard Horizon PHANTOM Series PS2000 - Manual (Page 55)

Page 55 Phantom PS2000
12.12 CHANNEL NAME CHANGE
This selection allows you to customize the name of a channel from the default
name.
1. Press and hold down the [CALL(SET)MENU] key until
“ RADIO SETUP ” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [ ] or
[ ] key to select “ CH NAME ” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [
] or [ ] key to select the channel to be named,
then press the [CALL(SET)MENU] key.
5. Press the [ ] or [ ] key to select the first charactor (letter,
number, or symbol) of the channel name.
6. Press the [CALL(SET)MENU] key to enter the first charactor
and move the cursor one space to the right.
7. Repeat step 5 and 6 until the name is complete. The name
can consist of up to twelve characters. If you do not use all
twelve character, press the [CALL(SET)MENU] key to move
to the next space. To clear the previous letter, press the
[H/L] key.
8. Press and hold the [CALL(SET)MENU] key to store the new
name.
9. If you want to enter the name of another channel, repeat steps 3 through 8.
10. To exit this menu and return to radio operation mode press the [16/9] key.