Standard Horizon PHANTOM Series PS2000 - Manual (Page 15)

Page 15 Phantom PS2000
8.8 CHANGING THE TIME OFFSET
If you change the time display to “Local time” in the previous section, you need
change the time offset to show the local time correctly in your area.
1. Press and hold down the [CALL(SET)MENU] key until
“ RADIO SETUP ” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [ ] or
[ ] key to select “ TIME ” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [
] or [ ] key to select time offset from UTC.
See illustration below to find your offset time from UTC. If
“
00 ” is assigned, the time is the same as UTC (Universal
Time Coordinated or GMT Greenwich Mean Time).
5. Press the [CALL(SET)MENU] key to store the time offset.
6. Press the [16/9] key to return to radio operation.
O
FFSET
T
IME
T
ABLE