Standard Horizon PHANTOM Series PS2000 - Manual (Page 20)

Phantom PS2000 Page 20
9.2 CMP25 RAM+ MICROPHONE
SQUELCH CONTROL (SQL)
Activates the squelch adjusting
mode.
Press this key to activate the squelch
adjusting mode. Press the [ ] or [ ]
key to adjust the squelch.
VOLUME KEY (VOL)
Activates the volume adjusting
mode.
Press this key to activate the volume
adjusting mode. Press the [ ] or [ ]
to adjust the volume.
POWER SWITCH (PWR)
Press and hold down this key to turn
to the transceiver and RAM+ Mic on
and off.
PTT (Push-To-Talk) SWITCH
Activates transmission.
[H/L] KEY
Toggles between high and low power. When the [H/L] key is pressed while
the transceiver is on channel 13 or 67, the power will temporarily switch
from “LO” to “HI” power until the PTT is released. The [H/L] key does not
function on transmit inhibited and low power only channels.
[ ] / [ ] KEY
These keys are used to select channels, adjust the volume and squelch
level, and to choose the item selection of different functions (such as the
DSC operation).
[16/9] KEY
Immediately recalls channel 16 from any channel location. Holding down
this key recalls channel 9. Pressing the [16/9] key reverts to the previous
selected working channel.
Secondary use
Press and hold the [16/9] key then press the [WX] key to switch the USA,
International or Canadian channels.
SCAN DW
NAV
WX
CALL
SET
MEM IC
U.I.C
MENU
16
9