Southbend South Bend SB1027 - Manual (Page 81)

For Machines Mfg. Since 8/09 Model SB1027
-79-
P A R T S
Machine Labels A
REF PART # DESCRIPTION REF PART # DESCRIPTION
1201 PSBLABEL08HL ENTANGLEMENT HAZARD LABEL 1209 PSBLABEL02HL DISCONNECT WARNING LABEL
1202 PSB10271202 LUBRICATION DIRECTION LABEL 1210 PSBLABEL13HL CLOSE DOOR WARNING LABEL
1203 PSBLABEL03HL EYE INJURY HAZARD LABEL 1211 PSB10241113 RAPID FEED LABEL
1204 PSBLABEL01HL READ MANUAL LABEL 1212 PSB10241114 POWER FEED CONTROL PANEL LABEL
1205 PSB10271205 TRAINED PERSONNEL NOTICE LABEL 1213 PSB10271213 MODEL NUMBER LABEL
1206 PSB10271206 MACHINE ID LABEL 1214 PSBPAINT03 SB DARK BLUE TOUCH-UP PAINT
1207 PSB10271207 CONTROL PANEL LABEL 1215 PSBPAINT 02 SB LIGHT BLUE TOUCH-UP PAINT
1208 PSB10241105 DOWNFEED SELECTOR LABEL 1216 PSBPAINT01 SB GRAY TOUCH-UP PAINT
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
The safety labels provided with your machine are used to make the operator aware of the
machine hazards and ways to prevent injury. The owner of this machine MUST maintain the
original location and readability of these safety labels. If any label is removed or becomes
unreadable, REPLACE that label before using the machine again. Contact South Bend Lathe Co. at
(360) 734-1540 or www.southbendlathe.com to order new labels.