Southbend South Bend SB1027 - Manual (Page 28)

-26-
For Machines Mfg. Since 8/09 Model SB1027 O P E R A T I O N
Control Panel
Use Figures 17–18 and the following
descriptions to understand the functions of the
mill main power switch and the control panel.
Main Power Switch: When turned ON, enables
power to flow to the control panel.
Figure 17. Location of the main power switch on the
electrical box door.
Main Power Switch
ON Button: When pressed, illuminates and
enables power to flow to the mill's electrical
components.
Coolant Switch: Turns coolant pump ON and
OFF.
Spindle Direction Switch: Starts, stops, and
reverses spindle rotation.
Spindle Speed Dial: Controls the spindle speed.
Spindle Speed Display: Shows the current
spindle speed in revolutions per minute (RPM).
Emergency STOP Button: When pressed,
disables the flow of power to the mill's electrical
components. Before resuming operation, this
button must be reset by twisting it clockwise
until it pops out.
Figure 18. Control panel.
Spindle
Speed Dial
Coolant
Switch
Emergency
STOP
Button
Spindle
Speed
Display
Spindle
Direction
Switch
ON
Button