Sanyo VCC-WB4000 - Manual (Page 40)

Alarm Settings
B Continuous Alarm Output
1
Set “ALARM OUT” to “NO” (example).
2
Set “ALARM OUT MODE” to “REMOTE
CONTROL”.
3
Set “ALARM OUT TIME” to “REMOTE”,
and then click the [SET] button.
This completes the setting, so return to the
live image screen. The “REMOTE ALARM”
indicator (gray) will be displayed in the initial
screen.
4
While monitoring the live images, click the
“REMOTE ALARM” indicator.
The “REMOTE ALARM” indicator will
illuminate orange and an alarm will be output
continuously. If you repeatedly click the
indicator, the continuous alarm output will
turn on and off each time you click the
indicator.
1
2
3
L5AM2/US (VCC-WB4000) GB 2003, 6, 6
English – 39 –