Sanyo VCC-WB4000 - Manual (Page 17)

Network Camera (Wired LAN) Settings
Initial Camera Screen
The initial screen is displayed once the network camera and the computer have been set. The initial
screen contains the buttons that are required for making various settings, and it also shows live images
from the network camera that have been compressed into JPEG2000 format.
1 Image quality mode select buttons
Selects the quality for the live images that are
being transmitted.
Available settings:
•
AUTO: (default setting)
The live images being transmitted are
automatically adjusted in accordance with the
computer.
•
FINE:
The live images being transmitted are
displayed at high quality. The actual image
display quality will vary depending on the
original quality at the time of transmission.
Note: The quality of the images will vary
depending on the capabilities of the
computer. If this is a problem, change the
setting to “FINE”. However, when fine
mode is selected, the image display
speed will be slower.
6 7
9 G H I
5 8
F
J
1
2
3
4
L5AM2/US (VCC-WB4000) GB 2003, 6, 6
– 16 – English