Sanyo VCC-WB4000 - Manual (Page 27)

CAMERA Settings
6 ELECTRONIC SHUTTER
This setting is used when IRIS is set to
automatic iris.
Setting range: 1/60 (default setting), 1/100,
1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
7 BLC (backlight compensation)
Available settings:
•
OFF (default setting): Backlight
compensation is not carried out.
•
MULTI (multiple point photometry):
Backlight compensation is calculated from
the whole image to obtain correct images.
•
CENTER (center focus photometry):
Backlight compensation is calculated based
on the center of the image to obtain correct
images.
8 WHITE BALANCE
Available settings:
•
AUTO (automatic white balance)(default
setting): The white balance is adjusted
automatically to obtain correct colors even if
the light source changes.
•
INDOOR: This setting is for when the
camera is being used indoors under
fluorescent lighting.
•
OUTDOOR: This setting is for when the
camera is being used outdoors under natural
sunlight.
•
MANUAL (manual white balance): This lets
you make manual fine adjustments to the
white balance. When “MANUAL” is selected,
you can adjust the red and blue colors. It can
be used when the “AUTO” setting does not
give correct color reproduction.
☞ Setting manual white balance
(MANUAL)
Click the and buttons repeatedly to
adjust the settings for R (red) and B (blue).
Setting range: 0 to 255
Note: The red or blue component becomes
stronger when the setting is higher.
9 GAMMA
Select a value that is suitable for the monitor
being used.
Setting range: 1, 0.8, 0.6, 0.45 (default setting),
0.3
F APERTURE
Set to “HIGH” if you would like the contours of
the objects in the images to be emphasized.
(Available settings: NORMAL, HIGH)
G
CONTRAST
Available settings:
•
NORMAL: When mainly viewing dark places
•
HIGH: When mainly viewing bright places
H DAY/NIGHT, AGC gain
Click the [DETAIL] button to change the
DAY/NIGHT and AGC Gain settings. The
"DAY/NIGHT SET" screen will be displayed and
detailed settings can be made in this screen.
(p. 27)
I [PRESET] button
Click this button to return all settings to their
factory defaults. A dialog box will be displayed.
Click the [OK] button to return the values to their
factory defaults.
L5AM2/US (VCC-WB4000) GB 2003, 6, 6
– 26 – English