beautypg.com

Installing the projector in proper position, Safety instructions – Sanyo PJLINK PLC-XL51 User Manual

Page 7

background image

7

Do not roll the projector more

than 10 degrees from side to

side.

Do not put the projector on

either side C or E to project an

image.

Install the projector properly. Improper Installation may reduce the lamp life and cause fire hazard.

Installing the Projector in Proper Position

10˚

10˚

Side A

Side B

Side C

Side F

Side E

Side D

This side is Side A or B.

Note:

• Fix the projector when installing it so that the

projector would not fall down.

Do not roll the projector more

than 5 degrees from side

to side when side A or B is

downward.

Safety Instructions

CAUTION

– Do not put anything or sit on the

projector, otherwise, it may fall down

or cause failure of the projector or

injury.

– Choose the running speed of cooling

fans in the fan control setting

according to the altitude in which the

projector is being used (p.54). Failure

to do so may affect the projector life.

For ceiling mounting, you need the ceiling mount kit designed for this projector. When not

mounted properly, the projector may fall, causing hazards or injury. For details, consult your

dealer. The warranty on this projector does not cover any damage caused by use of any non-

recommended ceiling mount kit or installation of the ceiling mount kit in an improper location.

CAUTION ON CEILING MOUNTING