Setting – Sanyo PJLINK PLC-XL51 User Manual

Page 53

Setting

The PIN code can be changed to your desired four-digit

number.

Select "PIN code change" with the Point

button,

and

press the SELECT button to display the New PIN code

input dialog box.

Select a number by pressing the Point

buttons. And

then press the Point

button to fix the number and

move the pointer. Repeat it to complete entering a four-

digit number. After entering the four-digit number, move

the pointer to "Set" by pressing the Point

button. Then

press the SELECT button.

Change the PIN code

Select PIN code change and
press the SELECT button.
The New PIN code input
dialog box appears.

Change the PIN code lock setting

CAUTION:
WHEN yOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE IN COLUMN OF THE
PIN CODE NO. MEMO ON PAGE 75, AND KEEP IT
SECURELy. IF yOU FORGET yOUR PIN CODE, THE
PROjECTOR CAN NO LONGER BE STARTED.

Select Off, On1, or On2 with the Point

7 8

buttons and

then move the red frame pointer to “Quit” with the Point

button. Press the SELECT button to close the dialog

box.

Change the PIN code lock setting

Select a desired setting with the
Point

7 8

buttons.

The input numbers
are being displayed for
confirmation.

Alarm

This function allows you to configure the Alarm

operation. See “How to Use the Antitheft Alarm

Function” on pages 56-59.