Sanyo PJLINK PLC-XL51 - Manual (Page 14)

✔ Note:
• This projector is not equipped with an
optical zoom. To adjust the screen size,
change the throw distance.
• The brightness in the room has a
great influence on picture quality. It is
recommended to limit the ambient lighting
in order to get the best image.
• All measurements are approximate and may
vary from the actual sizes. Make sure to
check the position of images by projecting
images on the screen before installing the
projector and screen, since each projector
shows slight variations.
• Make sure to project images on a flat
screen.
• Even slight warpage or irregularities of the
screen may have an effect on the quality of
the projected images.
80”
60”
B
A A
0.265’ ( 8.1 cm)
-0.131’ ( -4.0 cm)
(Inch Diagonal)
For the projector positioning, see the figures below.
The projector should be set perpendicularly to the plane of the screen.
Positioning the Projector
Installation
14
Screen Size
(W x H) mm
4:3 aspect ratio
60” 70” 80”
1219 x 914 1422 x 1067 1626 x 1219
A -0.131’ (-4.0 cm) 0.068’ (2.1 cm) 0.265’ (8.1 cm)
B 1.010’ (30.8 cm) 1.106’ (33.7 cm) 1.198’ (36.5 cm)
Projection angle can be adjusted up to 1.0 degree with the
adjustable feet.
Rotate the adjustable feet to adjust the position and
tilt.
Adjustable Feet
Keystone distortion of the projected image can be
corrected by menu operation (pp.24, 45).
Adjustable Feet